#!version:1.0.0.1
## Für T48G ##
bw.enable = 0
phone_setting.contact_photo_display.enable = 0

#############
## Web-Login ##
#############
wui.http_enable = 1
wui.https_enable = 1
network.port.http = 80
network.port.https = 443
web_item_level.url =
features.relog_offtime = 5

###########
## Security ##
###########
security.trust_certificates = 1
security.ca_cert = 2
security.cn_validation = 0
security.dev_cert = 0
security.user_name.admin = {$ast-profileusername}
security.user_password = {$ast-profileusername}:{$ast-profilepassword}
security.var_enable = 0
security.user_name.var = var
#features.action_uri_limit_ip=    #default-Konfig
features.factory_pwd_enable = 1
features.export_cfg_erase_pwd = 1
phone_setting.lock = 0
phone_setting.phone_lock.enable = 0
phone_setting.phone_lock.lock_key_type = 0
phone_setting.phone_lock.unlock_pin = 123
phone_setting.phone_lock.lock_time_out = 0
trusted_certificates.url =
trusted_certificates.delete =
server_certificates.url =
server_certificates.delete =

###########
# Netzwerk ##
###########
network.dhcp_host_name = {$ast-name}{$ast-phonenr}
network.ip_address_mode = 0             #0 = IPv4, 1 = IPv6, 2 = mixed
network.static_dns_enable = 0
network.vlan.dhcp_enable=
network.vlan.dhcp_option=
network.dhcp_host_name =
network.port.max_rtpport = 11800
network.port.min_rtpport = 11780
network.qos.rtptos = 46
network.qos.signaltos = 26
network.lldp.enable = 1
network.lldp.packet_interval = 60
network.span_to_pc_port =0

### SIP ###
sip.reg_surge_prevention = 0
sip.send_response_by_request = 1
sip.notify_reboot_enable = 1
sip.use_23_as_pound = 1
sip.rfc2543_hold = 1
sip.use_out_bound_in_dialog = 1
phone_setting.is_deal180 = 1

### Multicast ###
multicast.codec = PCMA
multicast.receive_priority.enable = 1
multicast.receive_priority.priority =10
multicast.listen_address.X.ip_address =         # X = 1 - 10
multicast.listen_address.X.label =              # X = 1 - 10

### Dial-Plan-Rules ###
dialplan.area_code.code =
dialplan.area_code.min_len = 1
dialplan.area_code.max_len = 15
dialplan.area_code.line_id =
dialplan.block_out.number.X =
dialplan.block_out.line_id.X =
dialplan.dialnow.rule.X =
dialplan.dialnow.line_id.X =
dialplan_dialnow.url =
dialplan.replace.prefix.X =
dialplan.replace.replace.X =
dialplan.replace.line_id.X =
dialplan_replace_rule.url =
phone_setting.dialnow_delay =

### SYS-Log ###
syslog.mode = 0
syslog.server=
syslog.log_level = 3

### 802.1x ###
network.802_1x.mode = 0
network.802_1x.identity =
network.802_1x.md5_password =
network.802_1x.root_cert_url=
network.802_1x.client_cert_url =

### VPN ###
network.vpn_enable = 0
openvpn.url =

## Internet-Port##
network.internet_port.type = 0          #0= DHCP, 1= PPPoE, 2= static
network.internet_port.speed_duplex =0
network.vlan.internet_port_enable =0
network.vlan.internet_port_vid =1
network.vlan.internet_port_priority =0
### IPv4 Options###                     ## Nur wenn network. internet_port.type !=0 ##
#network.internet_port.ip =
#network.internet_port.mask =
#network.internet_port.gateway =
#network.primary_dns =
#network.secondary_dns =
#network.pppoe.user =
#network.pppoe.password =
### IPv6 Options###                     ## Nur wenn network.ip_address_mode != 0 ##
#network.ipv6_internet_port.type =
#network.ipv6_static_dns_enable =
#network.ipv6_prefix =
#network.ipv6_internet_port.ip =
#network.ipv6_internet_port.gateway =
#network.ipv6_primary_dns=
# network.ipv6_secondary_dns =
#network.ipv6_icmp_v6.enable =

## PC-Port##
network.bridge_mode = 1
network.pc_port.enable = 1
network.pc_port.speed_duplex = 0
### IPv4 Options ###                    ## Nur wenn network.bridge_mode = 0 ##
#network.pc_port.ip =
#network.pc_port.mask =
#network.pc_port.dhcp_server =
#network.dhcp.start_ip =
#network.dhcp.end_ip =

### VLAN ###
#network.vlan.pc_port_vid =
#network.vlan.pc_port_priority =
#network.vlan.pc_port_mode=

################
#Auto Provisioning#
################
auto_provision.power_on = 1
auto_provision.pnp_enable = 1
#auto_provision.server.url = http://{$ast-ipconnect}/specials/yealink/prov    #automatisch belegt
auto_provision.server.username =
auto_provision.server.password =
auto_provision.repeat.enable = 1
auto_provision.repeat.minutes = 5
auto_provision.weekly.enable = 0
auto_provision.weekly.dayofweek =
auto_provision.weekly.begin_time =
auto_provision.weekly.end_time =
auto_provision.dhcp_option.enable = 1
auto_provision.dhcp_option.list_user_options =
auto_provision.dhcp_option.option60_value = yealink
auto_provision.aes_key_16.com =
auto_provision.aes_key_16.mac =
auto_provision.aes_key_in_file =
autoprovision.X.name =
autoprovision.X.code =
autoprovision.X.url =
autoprovision.X.user =
autoprovision.X.password =
autoprovision.X.com_aes =
autoprovision.X.mac_aes =
zero_touch.enable = 0
zero_touch.wait_time = 5
custom_factory_configuration.url =
features.custom_factory_config.enable = 0
configuration.url =
custom_mac_cfg.url =

### TR0069 ###
managementserver.enable = 0
managementserver.username =
managementserver.password =
managementserver.url =
managementserver.periodic_inform_enable = 1
managementserver.periodic_inform_interval = 60
managementserver.connection_request_username =
managementserver.connection_request_password =

##################
## Telefon-Optionen ##
##################
lang.wui = German
features.config_dsskey_length = 1                       #Lange Labels im Display
lang.wui = German
lang.gui = German
phone_setting.backgrounds = Resource:3.png
watch_dog.enable = 1
phone_setting.page_tip = 1
wallpaper_upload.url =
call_waiting.enable = 0
call_waiting.tone = 1
call_waiting.on_code =
call_waiting.off_code =
auto_redial.enable = 0
auto_redial.interval = 10
auto_redial.times = 10
features.call_num_filter = "-,"
features.dnd_refuse_code = 480
features.normal_refuse_code = 486
features.call_completion_enable = 0
features.headset_prior = 1
features.headset_training = 0
features.busy_tone_delay = 0
features.send_pound_key =
features.key_as_send = 0
features.send_key_tone = 1
features.password_dial.enable = 0
features.password_dial.prefix =
features.password_dial.length =
features.save_call_history = 1
features.direct_ip_call_enable = 1
features.allow_mute = 1
features.group_listen_in_talking_enable = 1
phone_setting.predial_autodial = 0
phone_setting.inter_digit_time = 4
features.bluetooth_enable =0
phone_setting.contrast = 6
phone_setting.lcd_logo.text= Astimax
phone_setting.active_backlight_level = 8
phone_setting.inactive_backlight_level = 1
phone_setting.backlight_time = 60
phone_setting.logon_wizard= 0
phone_setting.headsetkey_mode = 1
phone_setting.emergency.number = 110,112,911
phone_setting.show_code403 =
super_search.recent_call = 0
super_search.url =
features.auto_answer_delay=1

## LED ##
phone_setting.common_power_led_enable = 0
phone_setting.ring_power_led_flash_enable = 1
phone_setting.mail_power_led_flash_enable = 1
phone_setting.mute_power_led_flash_enable = 0
phone_setting.hold_and_held_power_led_flash_enable= 1
phone_setting.talk_and_dial_power_led_enable = 1

## DTMF ##
features.dtmf.hide = 0
features.dtmf.hide_delay = 0
features.dtmf.repetition = 3
features.dtmf.replace_tran = 0
features.dtmf.transfer =

## Intercom ##
features.intercom.allow = 1
features.intercom.mute = 0
features.intercom.tone = 1
features.intercom.barge = 0

## Push-XML ##
#push_xml.server =    #default-Konfig
push_xml.block_in_calling = 0
push_xml.sip_notify = 0

## Hot Desking ##
hotdesking.startup_register_name_enable = 0
hotdesking.startup_username_enable = 0
hotdesking.startup_password_enable = 0
hotdesking.startup_sip_server_enable = 0
hotdesking.startup_outbound_enable = 0
hotdesking.dsskey_register_name_enable = 0
hotdesking.dsskey_username_enable = 0
hotdesking.dsskey_password_enable = 0
hotdesking.dsskey_sip_server_enable = 0
hotdesking.dsskey_outbound_enable = 0

### ACD ###
acd.auto_available = 0
acd.auto_available_timer = 60

### Transfer-Optionen ###
transfer.semi_attend_tran_enable = 1
transfer.blind_tran_on_hook_enable = 1
transfer.on_hook_trans_enable = 1
transfer.dsskey_deal_type = 1
transfer.multi_call_trans_enable = 1
transfer.tran_others_after_conf_enable = 0

### Voice ###
voice.vad = 0
voice.cng = 1
voice.echo_cancellation = 1
voice.jib.adaptive = 1
voice.jib.min = 60
voice.jib.max = 240
voice.jib.normal = 120
voice.tone.country = Germany

## Folgende werte nur wenn voice.tone.country = Custom ##
voice.tone.dial =
voice.tone.ring =
voice.tone.busy =
voice.tone.congestion =
voice.tone.callwaiting =
voice.tone.dialrecall =
voice.tone.info =
voice.tone.stutter =
voice.tone.message =
voice.tone.autoanswer =

########################
#Klingeltöne und Lautstärken#
########################
#voice.ring_vol = 2
#voice.handfree.tone_vol = 9
#voice.handset.tone_vol = 9
#voice.headset.tone_vol = 8
#voice.group_spk_vol = 8
#voice.handfree.spk_vol = 8
#voice.handset.spk_vol = 8
#voice.headset.spk_vol = 8
#voice.handfree_send = 35
#voice.handset_send = 25
#voice.headset_send = 30
phone_setting.ring_type = Ring1.wav
features.ringer_device.is_use_headset = 2
phone_setting.ring_for_tranfailed = Ring1.wav
features.alert_info_tone = 1
distinctive_ring_tones.alert_info.X.text =                      # X = 1 - 10
distinctive_ring_tones.alert_info.X.ringer =1           # X = 1 - 10
features.key_tone = 0
features.play_hold_tone.enable = 1
features.play_hold_tone.delay = 30
features.redial_tone = 0
features.partition_tone = 0
features.voice_mail_tone_enable = 1

#######################
#Weiterleitungen und Pickup#
#######################
forward.international.enable = 1
features.fwd_mode = 0
features.dnd_mode = 0
## Wenn features.dnd_mode = 1 ##
#features.dnd.enable = 0
#features.dnd.on_code =
#features.dnd.off_code =
features.dnd.emergency_enable = 0
features.dnd.emergency_authorized_number =
features.fwd_diversion_enable = 1

## Sofort ##
forward.always.enable = {$ast-cfuextern}
forward.always.target = {$ast-cfuexterndst}
forward.always.on_code = *61*
forward.always.off_code = *61*

## Besetzt ##
forward.busy.enable = {$ast-cfbsextern}
forward.busy.target = {$ast-cfbsexterndst}
forward.busy.on_code = *63*
forward.busy.off_code = *63*

## Nach Zeit ##
forward.no_answer.enable = {$ast-cfnrextern}
forward.no_answer.target = {$ast-cfnrexterndst}
forward.no_answer.timeout ={$ast-cfnrexterntime}
forward.no_answer.on_code = *62*
forward.no_answer.off_code = *62

## Pickup-Codes ##
features.pickup.direct_pickup_code = *8
features.pickup.direct_pickup_enable = 1
features.pickup.group_pickup_enable = 1
features.pickup.group_pickup_code = *8
features.pickup.blf_visual_enable = 1
features.pickup.blf_audio_enable = 0
features.blf_led_mode = 0
features.blf_list_version = 1

#############
## Account 1 ##
#############
account.1.transport = 0
account.1.codec.1.priority = 2
account.1.codec.2.priority = 0
account.1.codec.5.enable = 0
account.1.codec.2.payload_type = PCMA
account.1.codec.2.rtpmap = 8
account.1.enable = 1
account.1.label = {$ast-name} {$ast-firstname}
account.1.display_name = {$ast-phonenr}
account.1.user_name = {$ast-phonenr}
account.1.auth_name = {$ast-phonenr}
account.1.password = {$ast-sippassword}
voice_mail.number.1 = {$ast-vmailboxnr}
account.1.subscribe_mwi = 1
account.1.subscribe_mwi_expires = 3600
account.1.subscribe_mwi_to_vm = 0
account.1.outbound_proxy_enable = 0
account.1.outbound_host = {$ast-ipconnect}
account.1.outbound_port = 5060
account.1.proxy_require = {$ast-ipconnect}
account.1.sip_server.1.address = {$ast-ipconnect}
account.1.sip_server.1.port =5060
account.1.sip_server.1.expires = 3600
account.1.sip_server.1.retry_counts =3
account.1.sip_server.1.failback_mode =0
account.1.sip_server.1.register_on_enable=0
account.1.sip_server.1.failback_timeout =3600
account.1.sip_server.2.address =
account.1.sip_server.2.port =5060
account.1.sip_server.2.expires = 3600
account.1.sip_server.2.retry_counts =3
account.1.sip_server.2.failback_mode =0
account.1.sip_server.2.failback_timeout =3600
account.1.sip_server.1.register_on_enable=0
account.1.enable_user_equal_phone = 1
account.1.unregister_on_reboot = 1
account.1.out_dialog_blf_enable = 0
account.1.reregister_enable= 0
account.1.naptr_build = 0
account.1.fallback.redundancy_type = 0
account.1.fallback.timeout=120
account.1.static_cache_pri= 0
account.1.dns_cache_type=1
account.1.dns_cache_a.Y.name =
account.1.dns_cache_a.Y.ip=
account.1.dns_cache_a.Y.ttl=
account.1.dns_cache_srv.Y.name =
account.1.dns_cache_srv.Y.port =
account.1.dns_cache_srv.Y.priority =0
account.1.dns_cache_srv.Y.target =
account.1.dns_cache_srv.Y.weight =0
account.1.dns_cache_srv.Y.ttl = 300
account.1.dns_cache_naptr.Y.name =
account.1.dns_cache_naptr.Y.flags =
account.1.dns_cache_naptr.Y.order =0
account.1.dns_cache_naptr.Y.preference= 0
account.1.dns_cache_naptr.Y.replace =
account.1.dns_cache_naptr.Y.service =
account.1.dns_cache_naptr.Y.ttl =300
account.1.srv_ttl_timer_enable =0
account.1.sip_trust_ctrl =0
account.1.anonymous_call = 0
account.1.send_anonymous_code = 0
account.1.anonymous_call_oncode =
account.1.anonymous_call_offcode =
account.1.reject_anonymous_call = 0
account.1.anonymous_reject_oncode =
account.1.anonymous_reject_offcode =
## Folgende Werte greifen nur wenn $feature_mode auf 1 steht ##
#account.1.dnd.enable = 0
#account.1.dnd.on_code =
#account.1.dnd.off_code =
#account.X.always_fwd.target =
#account.X.always_fwd.off_code =
#account.X.always_fwd.on_code =
#account.X.busy_fwd.enable=
#account.X.busy_fwd.target=
#account.X.busy_fwd.off_code =
#account.X.busy_fwd.on_code =
#account.X.timeout_fwd.enable =
#account.X.timeout_fwd.target =
#account.X.timeout_fwd.timeout =
#account.X.timeout_fwd.off_code =
#account.X.timeout_fwd.on_code =
account.1.sip_listen_port = 5060
account.1.100rel_enable = 0
account.1.cid_source = 2
account.1.cid_source_privacy = 1
account.1.cid_source_ppi = 1
account.1.cp_source = 0
account.1.session_timer.enable = 0
account.1.session_timer.expires = 1800
account.1.session_timer.refresher = 0
account.1.srtp_encryption =0
account.1.ptime = 20
account.1.bla_number =
account.1.bla_subscribe_period = 300
account.1.register_mac = 0
account.1.register_line =0
account.1.dialoginfo_callpickup = 0
account.1.group_pickup_code =
account.1.direct_pickup_code =
account.1.auto_answer =0
account.1.missed_calllog = 1
account.1.reg_fail_retry_interval = 30
account.1.conf_type = 0
account.1.conf_uri =
account.1.blf.subscribe_period = 1800
account.1.blf.subscribe_event = 0
account.1.sip_server_type = 0
account.1.music_server_uri=
account.1.dtmf.type = 0
account.1.dtmf.dtmf_payload = 101
account.1.nat.nat_traversal=0
account.1.nat.stun_server =
account.1.nat.stun_port =3478
account.1.nat.udp_update_enable =1
account.1.nat.udp_update_time = 30
account.1.nat.rport =0
account.1.advanced.timer_t1 =0.5
account.1.advanced.timer_t2 = 4
account.1.advanced.timer_t4 = 5
account.1.alert_info_url_enable = 1
account.1.ringtone.ring_type= Common
account.1.picture_info_enable = 0
account.1.compact_header_enable = 0
account.1.music_on_hold_type = 0
account.1.acd.enable = 0
account.1.acd.available = 0
account.1.subscribe_acd_expires = 1800

#############
## Account 2 ##
#############
account.2.transport = 0
account.2.codec.1.priority = 2
account.2.codec.2.priority = 0
account.2.codec.5.enable = 0
account.2.codec.2.payload_type = PCMA
account.2.codec.2.rtpmap = 8
account.2.enable = 0
account.2.label =
account.2.display_name =
account.2.user_name =
account.2.auth_name =
account.2.password =
voice_mail.number.2 =
account.2.subscribe_mwi = 1
account.2.ubscribe_mwi_expires = 3600
account.2.subscribe_mwi_to_vm = 0
account.2.outbound_proxy_enable = 0
account.2.outbound_host =
account.2.outbound_port = 5060
account.2.proxy_require =
account.2.sip_server.1.address =
account.2.sip_server.1.port =5060
account.2.sip_server.1.expires = 3600
account.2.sip_server.1.retry_counts =3
account.2.sip_server.1.failback_mode =0
account.2.sip_server.1.register_on_enable=0
account.2.sip_server.1.failback_timeout =3600
account.2.sip_server.2.address =
account.2.sip_server.2.port =5060
account.2.sip_server.2.expires = 3600
account.2.sip_server.2.retry_counts =3
account.2.sip_server.2.failback_mode =0
account.2.sip_server.2.failback_timeout =3600
account.2.sip_server.1.register_on_enable=0
account.2.enable_user_equal_phone = 1
account.2.unregister_on_reboot = 1
account.2.out_dialog_blf_enable = 0
account.2.reregister_enable= 0
account.2.naptr_build = 0
account.2.fallback.redundancy_type = 0
account.2.fallback.timeout=120
account.2.static_cache_pri= 0
account.2.dns_cache_type=1
account.2.dns_cache_a.Y.name =
account.2.dns_cache_a.Y.ip=
account.2.dns_cache_a.Y.ttl=
account.2.dns_cache_srv.Y.name =
account.2.dns_cache_srv.Y.port =
account.2.dns_cache_srv.Y.priority =0
account.2.dns_cache_srv.Y.target =
account.2.dns_cache_srv.Y.weight =0
account.2.dns_cache_srv.Y.ttl = 300
account.2.dns_cache_naptr.Y.name =
account.2.dns_cache_naptr.Y.flags =
account.2.dns_cache_naptr.Y.order =0
account.2.dns_cache_naptr.Y.preference= 0
account.2.dns_cache_naptr.Y.replace =
account.2.dns_cache_naptr.Y.service =
account.2.dns_cache_naptr.Y.ttl =300
account.2.srv_ttl_timer_enable =0
account.2.sip_trust_ctrl =0
account.2.anonymous_call = 0
account.2.send_anonymous_code = 0
account.2.anonymous_call_oncode =
account.2.anonymous_call_offcode =
account.2reject_anonymous_call = 0
account.2.nonymous_reject_oncode =
account.2.anonymous_reject_offcode =
## Folgende Werte greifen nur wenn $feature_mode auf 1 steht ##
#account.2.dnd.enable = 0
#account.2.dnd.on_code =
#account.2.dnd.off_code =
#account.2.always_fwd.target =
#account.2.always_fwd.off_code =
#account.2.always_fwd.on_code =
#account.2.busy_fwd.enable=
#account.2.busy_fwd.target=
#account.2.busy_fwd.off_code =
#account.2.busy_fwd.on_code =
#account.2.timeout_fwd.enable =
#account.2.timeout_fwd.target =
#account.2.timeout_fwd.timeout =
#account.2.timeout_fwd.off_code =
#account.2.timeout_fwd.on_code =
account.2.sip_listen_port = 5060
account.2.100rel_enable = 0
account.2.cid_source = 2
account.2.cid_source_privacy = 1
account.2.cid_source_ppi = 1
account.2.cp_source = 0
account.2.session_timer.enable = 0
account.2.session_timer.expires = 1800
account.2.session_timer.refresher = 0
account.2.srtp_encryption =0
account.2.ptime = 20
account.2.bla_number =
account.2.bla_subscribe_period = 300
account.2.register_mac = 0
account.2.register_line =0
account.2.dialoginfo_callpickup = 0
account.2.group_pickup_code =
account.2.direct_pickup_code =
account.2.auto_answer =0
account.2.missed_calllog = 1
account.2.reg_fail_retry_interval = 30
account.2.conf_type = 0
account.2.conf_uri =
account.2.blf.subscribe_period = 1800
account.2.blf.subscribe_event = 0
account.2.sip_server_type = 0
account.2.music_server_uri=
account.2.dtmf.type = 0
account.2.dtmf.dtmf_payload = 101
account.2.nat.nat_traversal=0
account.2.nat.stun_server =
account.2.nat.stun_port =3478
account.2.nat.udp_update_enable =1
account.2.nat.udp_update_time = 30
account.2.nat.rport =0
account.2.advanced.timer_t1 =0.5
account.2.advanced.timer_t2 = 4
account.2.advanced.timer_t4 = 5
account.2.alert_info_url_enable = 1
account.2.ringtone.ring_type= Common
account.2.picture_info_enable = 0
account.2.compact_header_enable = 0
account.2.music_on_hold_type = 0
account.2.acd.enable = 0
account.2.acd.available = 0
account.2.subscribe_acd_expires = 1800

#############
## Account 3 ##
#############
account.3.transport = 0
account.3.codec.1.priority = 2
account.3.codec.2.priority = 0
account.3.codec.5.enable = 0
account.3.codec.2.payload_type = PCMA
account.3.codec.2.rtpmap = 8
account.3.enable = 0
account.3.label =
account.3.display_name =
account.3.user_name =
account.3.auth_name =
account.3.password =
voice_mail.number.3 =
account.3.subscribe_mwi = 1
account.3.subscribe_mwi_expires = 3600
account.3.subscribe_mwi_to_vm = 0
account.3.outbound_proxy_enable = 0
account.3.outbound_host =
account.3.outbound_port = 5060
account.3.proxy_require =
account.3.sip_server.1.address =
account.3.sip_server.1.port =5060
account.3.sip_server.1.expires = 3600
account.3.sip_server.1.retry_counts =3
account.3.sip_server.1.failback_mode =0
account.3.sip_server.1.register_on_enable=0
account.3.sip_server.1.failback_timeout =3600
account.3.sip_server.2.address =
account.3.sip_server.2.port =5060
account.3.sip_server.2.expires = 3600
account.3.sip_server.2.retry_counts =3
account.3.sip_server.2.failback_mode =0
account.3.sip_server.2.failback_timeout =3600
account.3.sip_server.1.register_on_enable=0
account.3.enable_user_equal_phone = 1
account.3.unregister_on_reboot = 1
account.3.out_dialog_blf_enable = 0
account.3.reregister_enable= 0
account.3.naptr_build = 0
account.3.fallback.redundancy_type = 0
account.3.fallback.timeout=120
account.3.static_cache_pri= 0
account.3.dns_cache_type=1
account.3.dns_cache_a.Y.name =
account.3.dns_cache_a.Y.ip=
account.3.dns_cache_a.Y.ttl=
account.3.dns_cache_srv.Y.name =
account.3.dns_cache_srv.Y.port =
account.3.dns_cache_srv.Y.priority =0
account.3.dns_cache_srv.Y.target =
account.3.dns_cache_srv.Y.weight =0
account.3.dns_cache_srv.Y.ttl = 300
account.3.dns_cache_naptr.Y.name =
account.3.dns_cache_naptr.Y.flags =
account.3.dns_cache_naptr.Y.order =0
account.3.dns_cache_naptr.Y.preference= 0
account.3.dns_cache_naptr.Y.replace =
account.3.dns_cache_naptr.Y.service =
account.3.dns_cache_naptr.Y.ttl =300
account.3.srv_ttl_timer_enable =0
account.3.sip_trust_ctrl =0
account.3.anonymous_call = 0
account.3.send_anonymous_code = 0
account.3.anonymous_call_oncode =
account.3.anonymous_call_offcode =
account.3.reject_anonymous_call = 0
account.3.anonymous_reject_oncode =
account.3.anonymous_reject_offcode =
## Folgende Werte greifen nur wenn $feature_mode auf 1 steht ##
#account.3.dnd.enable = 0
#account.3.dnd.on_code =
#account.3.dnd.off_code =
#account.3.always_fwd.target =
#account.3.always_fwd.off_code =
#account.3.always_fwd.on_code =
#account.3.busy_fwd.enable=
#account.3.busy_fwd.target=
#account.3.busy_fwd.off_code =
#account.3.busy_fwd.on_code =
#account.3.timeout_fwd.enable =
#account.3.timeout_fwd.target =
#account.3.timeout_fwd.timeout =
#account.3.timeout_fwd.off_code =
#account.3.timeout_fwd.on_code =
account.3.sip_listen_port = 5060
account.3.100rel_enable = 0
account.3.cid_source = 2
account.3.cid_source_privacy = 1
account.3.cid_source_ppi = 1
account.3.cp_source = 0
account.3.session_timer.enable = 0
account.3.session_timer.expires = 1800
account.3.session_timer.refresher = 0
account.3.srtp_encryption =0
account.3.ptime = 20
account.3.bla_number =
account.3.bla_subscribe_period = 300
account.3.register_mac = 0
account.3.register_line =0
account.3.dialoginfo_callpickup = 0
account.3.group_pickup_code =
account.3.direct_pickup_code =
account.3.auto_answer =0
account.3.missed_calllog = 1
account.3.reg_fail_retry_interval = 30
account.3.conf_type = 0
account.3.conf_uri =
account.3.blf.subscribe_period = 1800
account.3.blf.subscribe_event = 0
account.3.sip_server_type = 0
account.3.music_server_uri=
account.3.dtmf.type = 0
account.3.dtmf.dtmf_payload = 101
account.3.nat.nat_traversal=0
account.3.nat.stun_server =
account.3.nat.stun_port =3478
account.3.nat.udp_update_enable =1
account.3.nat.udp_update_time = 30
account.3.nat.rport =0
account.3.advanced.timer_t1 =0.5
account.3.advanced.timer_t2 = 4
account.3.advanced.timer_t4 = 5
account.3.alert_info_url_enable = 1
account.3.ringtone.ring_type= Common
account.3.picture_info_enable = 0
account.3.compact_header_enable = 0
account.3.music_on_hold_type = 0
account.3.acd.enable = 0
account.3.acd.available = 0
account.3.subscribe_acd_expires = 1800

#############
## Account 4 ##
#############
account.4.transport = 0
account.4.codec.1.priority = 2
account.4.codec.2.priority = 0
account.4.codec.5.enable = 0
account.4.codec.2.payload_type = PCMA
account.4.codec.2.rtpmap = 8
account.4.enable = 0
account.4.label =
account.4.display_name =
account.4.user_name =
account.4.auth_name =
account.4.password =
voice_mail.number.4 =
account.4.subscribe_mwi = 1
account.4.subscribe_mwi_expires = 3600
account.4.subscribe_mwi_to_vm = 0
account.4.outbound_proxy_enable = 0
account.4.outbound_host =
account.4.outbound_port = 5060
account.4.proxy_require =
account.4.sip_server.1.address =
account.4.sip_server.1.port =5060
account.4.sip_server.1.expires = 3600
account.4.sip_server.1.retry_counts =3
account.4.sip_server.1.failback_mode =0
account.4.sip_server.1.register_on_enable=0
account.4.sip_server.1.failback_timeout =3600
account.4.sip_server.2.address =
account.4.sip_server.2.port =5060
account.4.sip_server.2.expires = 3600
account.4.sip_server.2.retry_counts =3
account.4.sip_server.2.failback_mode =0
account.4.sip_server.2.failback_timeout =3600
account.4.sip_server.1.register_on_enable=0
account.4.enable_user_equal_phone = 1
account.4.unregister_on_reboot = 1
account.4.out_dialog_blf_enable = 0
account.4.reregister_enable= 0
account.4.naptr_build = 0
account.4.fallback.redundancy_type = 0
account.4.fallback.timeout=120
account.4.static_cache_pri= 0
account.4.dns_cache_type=1
account.4.dns_cache_a.Y.name =
account.4.dns_cache_a.Y.ip=
account.4.dns_cache_a.Y.ttl=
account.4.dns_cache_srv.Y.name =
account.4.dns_cache_srv.Y.port =
account.4.dns_cache_srv.Y.priority =0
account.4.dns_cache_srv.Y.target =
account.4.dns_cache_srv.Y.weight =0
account.4.dns_cache_srv.Y.ttl = 300
account.4.dns_cache_naptr.Y.name =
account.4.dns_cache_naptr.Y.flags =
account.4.dns_cache_naptr.Y.order =0
account.4.dns_cache_naptr.Y.preference= 0
account.4.dns_cache_naptr.Y.replace =
account.4.dns_cache_naptr.Y.service =
account.4.dns_cache_naptr.Y.ttl =300
account.4.srv_ttl_timer_enable =0
account.4.sip_trust_ctrl =0
account.4.anonymous_call = 0
account.4.send_anonymous_code = 0
account.4.anonymous_call_oncode =
account.4.anonymous_call_offcode =
account.4reject_anonymous_call = 0
account.4.nonymous_reject_oncode =
account.4.anonymous_reject_offcode =
## Folgende Werte greifen nur wenn $feature_mode auf 1 steht ##
#account.4.dnd.enable = 0
#account.4.dnd.on_code =
#account.4.dnd.off_code =
#account.4.always_fwd.target =
#account.4.always_fwd.off_code =
#account.4.always_fwd.on_code =
#account.4.busy_fwd.enable=
#account.4.busy_fwd.target=
#account.4.busy_fwd.off_code =
#account.4.busy_fwd.on_code =
#account.4.timeout_fwd.enable =
#account.4.timeout_fwd.target =
#account.4.timeout_fwd.timeout =
#account.4.timeout_fwd.off_code =
#account.4.timeout_fwd.on_code =
account.4.sip_listen_port = 5060
account.4.100rel_enable = 0
account.4.cid_source = 2
account.4.cid_source_privacy = 1
account.4.cid_source_ppi = 1
account.4.cp_source = 0
account.4.session_timer.enable = 0
account.4.session_timer.expires = 1800
account.4.session_timer.refresher = 0
account.4.srtp_encryption =0
account.4.ptime = 20
account.4.bla_number =
account.4.bla_subscribe_period = 300
account.4.register_mac = 0
account.4.register_line =0
account.4.dialoginfo_callpickup = 0
account.4.group_pickup_code =
account.4.direct_pickup_code =
account.4.auto_answer =0
account.4.missed_calllog = 1
account.4.reg_fail_retry_interval = 30
account.4.conf_type = 0
account.4.conf_uri =
account.4.blf.subscribe_period = 1800
account.4.blf.subscribe_event = 0
account.4.sip_server_type = 0
account.4.music_server_uri=
account.4.dtmf.type = 0
account.4.dtmf.dtmf_payload = 101
account.4.nat.nat_traversal=0
account.4.nat.stun_server =
account.4.nat.stun_port =3478
account.4.nat.udp_update_enable =1
account.4.nat.udp_update_time = 30
account.4.nat.rport =0
account.4.advanced.timer_t1 =0.5
account.4.advanced.timer_t2 = 4
account.4.advanced.timer_t4 = 5
account.4.alert_info_url_enable = 1
account.4.ringtone.ring_type= Common
account.4.picture_info_enable = 0
account.4.compact_header_enable = 0
account.4.music_on_hold_type = 0
account.4.acd.enable = 0
account.4.acd.available = 0
account.4.subscribe_acd_expires = 1800

#############
## Account 5 ##
#############
account.5.transport = 0
account.5.codec.1.priority = 2
account.5.codec.2.priority = 0
account.5.codec.5.enable = 0
account.5.codec.2.payload_type = PCMA
account.5.codec.2.rtpmap = 8
account.5.enable = 0
account.5.label =
account.5.display_name =
account.5.user_name =
account.5.auth_name =
account.5.password =
voice_mail.number.5 =
account.5.subscribe_mwi = 1
account.5.subscribe_mwi_expires = 3600
account.5.subscribe_mwi_to_vm = 0
account.5.outbound_proxy_enable = 0
account.5.outbound_host =
account.5.outbound_port = 5060
account.5.proxy_require =
account.5.sip_server.1.address =
account.5.sip_server.1.port =5060
account.5.sip_server.1.expires = 3600
account.5.sip_server.1.retry_counts =3
account.5.sip_server.1.failback_mode =0
account.5.sip_server.1.register_on_enable=0
account.5.sip_server.1.failback_timeout =3600
account.5.sip_server.2.address =
account.5.sip_server.2.port =5060
account.5.sip_server.2.expires = 3600
account.5.sip_server.2.retry_counts =3
account.5.sip_server.2.failback_mode =0
account.5.sip_server.2.failback_timeout =3600
account.5.sip_server.1.register_on_enable=0
account.5.enable_user_equal_phone = 1
account.5.unregister_on_reboot = 1
account.5.out_dialog_blf_enable = 0
account.5.reregister_enable= 0
account.5.naptr_build = 0
account.5.fallback.redundancy_type = 0
account.5.fallback.timeout=120
account.5.static_cache_pri= 0
account.5.dns_cache_type=1
account.5.dns_cache_a.Y.name =
account.5.dns_cache_a.Y.ip=
account.5.dns_cache_a.Y.ttl=
account.5.dns_cache_srv.Y.name =
account.5.dns_cache_srv.Y.port =
account.5.dns_cache_srv.Y.priority =0
account.5.dns_cache_srv.Y.target =
account.5.dns_cache_srv.Y.weight =0
account.5.dns_cache_srv.Y.ttl = 300
account.5.dns_cache_naptr.Y.name =
account.5.dns_cache_naptr.Y.flags =
account.5.dns_cache_naptr.Y.order =0
account.5.dns_cache_naptr.Y.preference= 0
account.5.dns_cache_naptr.Y.replace =
account.5.dns_cache_naptr.Y.service =
account.5.dns_cache_naptr.Y.ttl =300
account.5.srv_ttl_timer_enable =0
account.5.sip_trust_ctrl =0
account.5.anonymous_call = 0
account.5.send_anonymous_code = 0
account.5.anonymous_call_oncode =
account.5.anonymous_call_offcode =
account.5.reject_anonymous_call = 0
account.5.anonymous_reject_oncode =
account.5.anonymous_reject_offcode =
## Folgende Werte greifen nur wenn $feature_mode auf 1 steht ##
#account.5.dnd.enable = 0
#account.5.dnd.on_code =
#account.5.dnd.off_code =
#account.5.always_fwd.target =
#account.5.always_fwd.off_code =
#account.5.always_fwd.on_code =
#account.5.busy_fwd.enable=
#account.5.busy_fwd.target=
#account.5.busy_fwd.off_code =
#account.5.busy_fwd.on_code =
#account.5.timeout_fwd.enable =
#account.5.timeout_fwd.target =
#account.5.timeout_fwd.timeout =
#account.5.timeout_fwd.off_code =
#account.5.timeout_fwd.on_code =
account.5.sip_listen_port = 5060
account.5.100rel_enable = 0
account.5.cid_source = 2
account.5.cid_source_privacy = 1
account.5.cid_source_ppi = 1
account.5.cp_source = 0
account.5.session_timer.enable = 0
account.5.session_timer.expires = 1800
account.5.session_timer.refresher = 0
account.5.srtp_encryption =0
account.5.ptime = 20
account.5.bla_number =
account.5.bla_subscribe_period = 300
account.5.register_mac = 0
account.5.register_line =0
account.5.dialoginfo_callpickup = 0
account.5.group_pickup_code =
account.5.direct_pickup_code =
account.5.auto_answer =0
account.5.missed_calllog = 1
account.5.reg_fail_retry_interval = 30
account.5.conf_type = 0
account.5.conf_uri =
account.5.blf.subscribe_period = 1800
account.5.blf.subscribe_event = 0
account.5.sip_server_type = 0
account.5.music_server_uri=
account.5.dtmf.type = 0
account.5.dtmf.dtmf_payload = 101
account.5.nat.nat_traversal=0
account.5.nat.stun_server =
account.5.nat.stun_port =3478
account.5.nat.udp_update_enable =1
account.5.nat.udp_update_time = 30
account.5.nat.rport =0
account.5.advanced.timer_t1 =0.5
account.5.advanced.timer_t2 = 4
account.5.advanced.timer_t4 = 5
account.5.alert_info_url_enable = 1
account.5.ringtone.ring_type= Common
account.5.picture_info_enable = 0
account.5.compact_header_enable = 0
account.5.music_on_hold_type = 0
account.5.acd.enable = 0
account.5.acd.available = 0
account.5.subscribe_acd_expires = 1800

#############
## Account 6 ##
#############
account.6.transport = 0
account.6.codec.1.priority = 2
account.6.codec.2.priority = 0
account.6.codec.5.enable = 0
account.6.codec.2.payload_type = PCMA
account.6.codec.2.rtpmap = 8
account.6.enable = 0
account.6.label =
account.5.display_name =
account.6.user_name =
account.6.auth_name =
account.6.password =
voice_mail.number.6 =
account.6.subscribe_mwi = 1
account.6.subscribe_mwi_expires = 3600
account.6.subscribe_mwi_to_vm = 0
account.6.outbound_proxy_enable = 0
account.6.outbound_host =
account.6.outbound_port = 5060
account.6.proxy_require =
account.6.sip_server.1.address =
account.6.sip_server.1.port =5060
account.6.sip_server.1.expires = 3600
account.6.sip_server.1.retry_counts =3
account.6.sip_server.1.failback_mode =0
account.6.sip_server.1.register_on_enable=0
account.6.sip_server.1.failback_timeout =3600
account.6.sip_server.2.address =
account.6.sip_server.2.port =5060
account.6.sip_server.2.expires = 3600
account.6.sip_server.2.retry_counts =3
account.6.sip_server.2.failback_mode =0
account.6.sip_server.2.failback_timeout =3600
account.6.sip_server.1.register_on_enable=0
account.6.enable_user_equal_phone = 1
account.6.unregister_on_reboot = 1
account.6.out_dialog_blf_enable = 0
account.6.reregister_enable= 0
account.6.naptr_build = 0
account.6.fallback.redundancy_type = 0
account.6.fallback.timeout=120
account.6.static_cache_pri= 0
account.6.dns_cache_type=1
account.6.dns_cache_a.Y.name =
account.6.dns_cache_a.Y.ip=
account.6.dns_cache_a.Y.ttl=
account.1.dns_cache_srv.Y.name =
account.6.dns_cache_srv.Y.port =
account.6.dns_cache_srv.Y.priority =0
account.6.dns_cache_srv.Y.target =
account.6.dns_cache_srv.Y.weight =0
account.6.dns_cache_srv.Y.ttl = 300
account.6.dns_cache_naptr.Y.name =
account.6.dns_cache_naptr.Y.flags =
account.6.dns_cache_naptr.Y.order =0
account.6.dns_cache_naptr.Y.preference= 0
account.6.dns_cache_naptr.Y.replace =
account.6.dns_cache_naptr.Y.service =
account.6.dns_cache_naptr.Y.ttl =300
account.6.srv_ttl_timer_enable =0
account.6.sip_trust_ctrl =0
account.6.anonymous_call = 0
account.6.send_anonymous_code = 0
account.6.anonymous_call_oncode =
account.6.anonymous_call_offcode =
account.6.reject_anonymous_call = 0
account.6.nonymous_reject_oncode =
account.6.nonymous_reject_offcode =
## Folgende Werte greifen nur wenn $feature_mode auf 1 steht ##
#account.6.dnd.enable = 0
#account.6.dnd.on_code =
#account.6.dnd.off_code =
#account.6.always_fwd.target =
#account.6.always_fwd.off_code =
#account.6.always_fwd.on_code =
#account.6.busy_fwd.enable=
#account.6.busy_fwd.target=
#account.6.busy_fwd.off_code =
#account.6.busy_fwd.on_code =
#account.6.timeout_fwd.enable =
#account.6.timeout_fwd.target =
#account.6.timeout_fwd.timeout =
#account.6.timeout_fwd.off_code =
#account.6.timeout_fwd.on_code =
account.6.sip_listen_port = 5060
account.6.100rel_enable = 0
account.6.cid_source = 2
account.6.cid_source_privacy = 1
account.6.cid_source_ppi = 1
account.6.cp_source = 0
account.6.session_timer.enable = 0
account.6.session_timer.expires = 1800
account.6.session_timer.refresher = 0
account.6.srtp_encryption =0
account.6.ptime = 20
account.6.bla_number =
account.6.bla_subscribe_period = 300
account.6.register_mac = 0
account.6.register_line =0
account.6.dialoginfo_callpickup = 0
account.6.group_pickup_code =
account.6.direct_pickup_code =
account.6.auto_answer =0
account.6.missed_calllog = 1
account.6.reg_fail_retry_interval = 30
account.6.conf_type = 0
account.6.conf_uri =
account.6.blf.subscribe_period = 1800
account.6.blf.subscribe_event = 0
account.6.sip_server_type = 0
account.6.music_server_uri=
account.6.dtmf.type = 0
account.6.dtmf.dtmf_payload = 101
account.6.nat.nat_traversal=0
account.6.nat.stun_server =
account.6.nat.stun_port =3478
account.6.nat.udp_update_enable =1
account.6.nat.udp_update_time = 30
account.6.nat.rport =0
account.6.advanced.timer_t1 =0.5
account.61.advanced.timer_t2 = 4
account.6.advanced.timer_t4 = 5
account.6.alert_info_url_enable = 1
account.6.ringtone.ring_type= Common
account.6.picture_info_enable = 0
account.6.compact_header_enable = 0
account.6.music_on_hold_type = 0
account.6.acd.enable = 0
account.6.acd.available = 0
account.6.subscribe_acd_expires = 1800

##############
#Datum und Zeit#
##############
local_time.time_zone = +1
local_time.time_zone_name = Germany(Berlin)
local_time.manual_time_enable = 0
local_time.manual_ntp_srv_prior = 1
local_time.ntp_server1 = {$ast-ipconnect}
local_time.ntp_server2 = de.pool.ntp.org
local_time.interval = 3600
local_time.date_format = 5
local_time.summer_time = 2
local_time.dst_time_type = 1
#local_time.start_time = 03/Sun/lastinmonth/2
#local_time.end_time = 10/Sun/lastinmonth/3
local_time.dhcp_time = 0
local_time.offset_time =
local_time.time_format = 1
auto_dst.url =

##########
## Tasten ##
##########
phone_setting.custom_softkey_enable = 0
custom_softkey_call_failed.url =
custom_softkey_call_in.url =
custom_softkey_connecting.url =
custom_softkey_dialing.url =
custom_softkey_ring_back.url =
custom_softkey_talking.url =

## Line-Key ##
linekey.1.line = 1
linekey.1.type = {$ast-blftype(1)}
linekey.1.value = {$ast-blfvalue(1)}
linekey.1.label = {$ast-blflabel(1)}
linekey.2.line = 1
linekey.2.type = {$ast-blftype(2)}
linekey.2.value = {$ast-blfvalue(2)}
linekey.2.label = {$ast-blflabel(2)}
linekey.3.line = 1
linekey.3.type = {$ast-blftype(3)}
linekey.3.value = {$ast-blfvalue(3)}
linekey.3.label = {$ast-blflabel(3)}
linekey.4.line = 1
linekey.4.type = {$ast-blftype(4)}
linekey.4.value = {$ast-blfvalue(4)}
linekey.4.label = {$ast-blflabel(4)}
linekey.5.line = 1
linekey.5.type = {$ast-blftype(5)}
linekey.5.value = {$ast-blfvalue(5)}
linekey.5.label = {$ast-blflabel(5)}
linekey.6.line = 1
linekey.6.type =  {$ast-blftype(6)}
linekey.6.value =  {$ast-blfvalue(6)}
linekey.6.label = {$ast-blflabel(6)}
linekey.7.line = 1
linekey.7.type =  {$ast-blftype(7)}
linekey.7.value =  {$ast-blfvalue(7)}
linekey.7.label = {$ast-blflabel(7)}
linekey.8.line = 1
linekey.8.type =  {$ast-blftype(8)}
linekey.8.value =  {$ast-blfvalue(8)}
linekey.8.label = {$ast-blflabel(8)}
linekey.9.line = 1
linekey.9.type =  {$ast-blftype(9)}
linekey.9.value =  {$ast-blfvalue(9)}
linekey.9.label = {$ast-blflabel(9)}
linekey.10.line = 1
linekey.10.type =  {$ast-blftype(10)}
linekey.10.value =  {$ast-blfvalue(10)}
linekey.10.label = {$ast-blflabel(10)}
linekey.11.line = 1
linekey.11.type = {$ast-blftype(11)}
linekey.11.value = {$ast-blfvalue(11)}
linekey.11.label = {$ast-blflabel(11)}
linekey.12.line = 1
linekey.12.type = {$ast-blftype(12)}
linekey.12.value = {$ast-blfvalue(12)}
linekey.12.label = {$ast-blflabel(12)}
linekey.13.line = 1
linekey.13.type = {$ast-blftype(13)}
linekey.13.value = {$ast-blfvalue(13)}
linekey.13.label = {$ast-blflabel(13)}
linekey.14.line = 1
linekey.14.type = {$ast-blftype(14)}
linekey.14.value = {$ast-blfvalue(14)}
linekey.14.label = {$ast-blflabel(14)}
linekey.15.line = 1
linekey.15.type = {$ast-blftype(15)}
linekey.15.value = {$ast-blfvalue(15)}
linekey.15.label = {$ast-blflabel(15)}
linekey.16.line = 1
linekey.16.type = {$ast-blftype(16)}
linekey.16.value = {$ast-blfvalue(16)}
linekey.16.label = {$ast-blflabel(16)}
linekey.17.line = 1
linekey.17.type = {$ast-blftype(17)}
linekey.17.value = {$ast-blfvalue(17)}
linekey.17.label = {$ast-blflabel(17)}
linekey.18.line = 1
linekey.18.type =  {$ast-blftype(18)}
linekey.18.value = {$ast-blfvalue(18)}
linekey.18.label = {$ast-blflabel(18)}
linekey.19.line = 1
linekey.19.type =  {$ast-blftype(19)}
linekey.19.value = {$ast-blfvalue(19)}
linekey.19.label = {$ast-blflabel(19)}
linekey.20.line = 1
linekey.20.type =  {$ast-blftype(20)}
linekey.20.value = {$ast-blfvalue(20)}
linekey.20.label = {$ast-blflabel(20)}
linekey.21.line = 1
linekey.21.type =  {$ast-blftype(21)}
linekey.21.value = {$ast-blfvalue(21)}
linekey.21.label = {$ast-blflabel(21)}
linekey.22.line = 1
linekey.22.type =  {$ast-blftype(22)}
linekey.22.value = {$ast-blfvalue(22)}
linekey.22.label = {$ast-blflabel(22)}
linekey.23.line = 1
linekey.23.type =  {$ast-blftype(23)}
linekey.23.value = {$ast-blfvalue(23)}
linekey.23.label = {$ast-blflabel(23)}
linekey.24.line = 1
linekey.24.type =  {$ast-blftype(24)}
linekey.24.value = {$ast-blfvalue(24)}
linekey.24.label = {$ast-blflabel(24)}
linekey.25.line = 1
linekey.25.type =  {$ast-blftype(25)}
linekey.25.value = {$ast-blfvalue(25)}
linekey.25.label = {$ast-blflabel(25)}
linekey.26.line = 1
linekey.26.type =  {$ast-blftype(26)}
linekey.26.value = {$ast-blfvalue(26)}
linekey.26.label = {$ast-blflabel(26)}
linekey.27.line = 1
linekey.27.type =  {$ast-blftype(27)}
linekey.27.value = {$ast-blfvalue(27)}
linekey.27.label = {$ast-blflabel(27)}
linekey.28.line = 1
linekey.28.type = {$ast-blftype(28)}
linekey.28.value = {$ast-blfvalue(28)}
linekey.28.label = {$ast-blflabel(28)}
linekey.29.line = 1
linekey.29.type = {$ast-blftype(29)}
linekey.29.value = {$ast-blfvalue(29)}
linekey.29.label = {$ast-blflabel(29)}


#programablekey.2.type = 27
#programablekey.2.line = 1
#programablekey.2.value = http://172.20.153.1/specials/yealink/phonebook/startmenu.php
#programablekey.2.label = Telefonbuch
#programablekey.2.xml_phonebook = 0
#programablekey.2.pickup_value = %NULL%

############
#Telefonbuch#
############
features.remote_phonebook.enable = 0
features.remote_phonebook.flash_time = 21600
features.remote_phonebook.url =
features.remote_phonebook.display-name =
remote_phonebook.data.1.url = http://{$ast-ipconnect}/specials/snom/phonebook/startmenu.php
remote_phonebook.data.1.name = Astimax Telefonbuch
remote_phonebook.display_name =
directory_setting.url =
local_contact.data.url =
local_contact.data_photo_tar.url = https://wiki.addix.net/index.php/Astimax_5_und_Yealink

## LDAP ##
ldap.enable = 0
ldap.name_filter =
ldap.number_filter =
ldap.host =
ldap.port =389
ldap.base =
ldap.user =
ldap.password =
ldap.max_hits=50
ldap.name_attr =
ldap.numb_attr =
ldap.display_name =
dap.version=3
ldap.call_in_lookup = 0
ldap.ldap_sort= 0

###############
## Action-URLs ##
###############
action_url.setup_completed =
action_url.registered =
action_url.unregistered =
action_url.register_failed =
action_url.off_hook =
action_url.on_hook =
action_url.incoming_call =
action_url.outgoing_call =
action_url.call_established=
action_url.call_terminated =
action_url.dnd_on =
action_url.dnd_off =
action_url.always_fwd_on =
action_url.always_fwd_off =
action_url.busy_fwd_on =
action_url.busy_fwd_off =
action_url.no_answer_fwd_on =
action_url.no_answer_fwd_off =
action_url.transfer_call =
action_url.blind_transfer_call=
action_url.attended_transfer_call =
action_url.hold =
action_url.unhold =
action_url.mute =
action_url.unmute =
action_url.missed_call =
action_url.busy_to_idle =
action_url.idle_to_busy =
action_url.ip_change =
action_url.forward_incoming_call =
action_url.reject_incoming_call =
action_url.answer_new_incoming_call =
action_url.transfer_finished =
action_url.transfer_failed =

################
## Custom-URLs ##
################
firmware.url =
ringtone.url =
ringtone.delete =
gui_lang.url =
gui_lang.delete =